JVC CU-VD50U Instructions Manual page 42

Trouble
The remote control is
not working.
Unable to operate.
No images on the TV.
Images are distorted
during fast-forward/
fast-reverse playback.
The images cannot be
displayed in the
normal aspect ratio.
Reading fails.
Playback cannot
function properly.
Digest Playback
starts when the
PREVIOUS / NEXT
button is pressed
repeatedly.
42
Action
The remote control is not operable when the
disc tray is opened. Close the disc tray.
If the burner does not work at all, remove the
power plug and insert again. (It may not
function properly due to lightning strike or static
electricity.)
Connect this burner to a TV. (P. 12, 13)
Switch to the external output that connects the
burner to the TV with a video/audio input
connectors.
After pressing the power button, it will take
about 25 seconds to display the intermediate
screen. (P. 34)
If there are too many recorded files or when a
disc that is not recommended is used, it will
take several minutes to display the playback
navigator.
Check the resolution setting again. (P. 33)
Images may be distorted for sections where the
playback speed changes. This is not a
malfunction.
When both the HDMI terminal and Audio/Video
output connectors are connected, set "HDMI
VIDEO MODE" in the settings menu to "OFF" to
output the images with priority given to the
Audio/Video output connectors. (P. 36)
Insert the disc with the label facing up.
Wipe off any dirt that is found on the tray.
Make sure that the writing surface of the disc is
not damaged.
Do not use deformed discs.
Playback of commercial DVD-Video is not
guaranteed.
AVCHD disc created on a high definition Everio
is equipped with the Digest Playback function. If
the PREVIOUS / NEXT button is pressed
repeatedly during playback, Digest Playback
will start when the normal playback ends.
(P. 24)