Remote Control - JVC CU-VD50U Instructions Manual

Power (On/Off)
To perform basic setup
(P. 34)
To display the playback
navigator (P. 23)
Basic playback
operations
(P. 25, 28)
• If the burner responds poorly to the remote control, the battery of the
Note
remote control is weak. Replace it with a new battery. Insert correctly
according to the e and d directions indicated.
• If problem occurs while using the remote control, remove the battery
and insert it again before operating the remote control.
o
When using the remote
control for the first time
Pull out the insulation sheet

Remote Control

o
When replacing the battery
To display the tool menu (P. 25)
To display the playback menu
(P. 29)
To change the output
resolution of the image (P. 33)
To display information on the
screen (P. 39)
To display the playback
navigator (P. 27)
To select/confirm
To return to the previous
screen
Lithium battery
EN
ES
11