Part Names And Functions; Main Unit - Pioneer PDP-505CMX Operating Instructions Manual

Part Names and Functions

Main unit

Main unit
PDP-505CMX/
PDP-504CMX
3 4 5
Main unit
1
Display stand
2
Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 8).
3
Ambient light sensor
This sensor measures the level of light inside the
viewing room; it is enabled when the [ENERGY
SAVE] option is set to [AUTO] (page 31).
4
ON indicator
The indicator lights green when the Plasma Display is
powered up and functional (page 19).
When flashing, the indicator signals that there are error
messages (page 36).
The indicator flashes green once per second when the
[POWER MANAGEMENT] function is operational
(page 24).
5
STANDBY indicator
The indicator lights red when the unit is in standby mode
(page 19) but flashes to signal that there are errors
(page 36).
6
Handles
The handles are attached in different ways on the Plasma
Displays PDP-505CMX/PDP-504CMX and PDP-434CMX,
but the handles themselves are used in the same way on
these models (page 11).
6
En
PDP-434CMX
6
6
1 2
Operation panel on the main unit
7
8
9
0
-
=
~
!
Operation panel on the main unit
-
Note
When optional speakers have been connected,
the operation panel on the main unit is blocked
and unavailable.
STANDBY/ON button
Press to put the display in operation or standby mode
(page 19).
INPUT button
Press to select the input (page 19).
MENU button
Press to open and close the on-screen menu (pages
16 to 33).
ADJUST ( / / / ) buttons
Use these buttons to move the onscreen cursor
between selection options and to perform any
adjustments. Instructions for use are given with each
on-screen command option (pages 16 to 33).
VOLUME (+/–) buttons
When not being used with on-screen menu items,
these buttons adjust the volume of the sound
(pages 19 and 20).
SET/DISPLAY button
Use to confirm on-screen menu selections and to
change settings (pages 16 to 33).
When not being used by on-screen menus, the option
can display the current set status (page 20).
SCREEN SIZE button
Press to select the screen size (page 21).
AUTO SET UP button
When using computer signal input, this automatically
sets the [POSITION], [CLOCK] and [PHASE] to the
optimum values (page 26).
7
8
9
0
=
~
!