Pioneer PDP-505CMX Operating Instructions Manual page 14

50-inch; 43-inch professional plasma display
Hide thumbs Also See for PDP-505CMX:
Table of Contents

Advertisement

Available languages

Available languages

Illustration depicts PDP-505CMX/PDP-504CMX model.
SPEAKER
R
8Ω ~16Ω
+
1
3
RS-232C
Never connect any component to this connector
without first consulting your Pioneer installation
technician.
This connector is used for Plasma Display setup
adjustments.
4
ANALOG RGB IN (INPUT1) (mini D-sub 15 pin)
For connection of a personal computer (PC) or similar
component. Verifiy that the connection corresponds
to the format of the signal output from the added
component (page 12).
5
ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin)
Use the ANALOG RGB OUT (INPUT1) terminal to
output the video signal to an external monitor or other
component.
Note: The video signal is not output from the ANALOG
RGB OUT (INPUT1) terminal when the unit is powered
OFF or placed in Standby mode.
(page 12)
6
AUDIO (INPUT1) (Stereo mini jack)
Use to obtain sound when INPUT1 is selected.
Connect a component's audio output jack to
the panel's INPUT1 (page 13).
7
DIGITAL RGB (INPUT2) (DVI-D jack)
Use to connect a computer.
Note: This unit does not support displaying of
copyguard-protected video signals (page 12).
POWER
OFF
IN
OUT
RS-232C
COMBINATION
2
3
8
9
0
-
=
Part Names and Functions
AC IN
ON
0
-
INPUT1
ANALOG RGB IN
ANALOG RGB OUT
D-Sub
D-Sub
AUDIO
4
5
6
AUDIO (INPUT2) (Stereo mini jack)
Use to obtain sound when INPUT2 is selected.
Connect a component's audio output jack to
the panel's INPUT2 (page 13).
AUDIO (OUTPUT) (Stereo mini jack)
Use to output a selected source component's audio
connected to this unit to an AV amplifier or a similar
device.
Note: No sound is produced from the AUDIO (OUTPUT) jack
when the power is switched OFF or set to ON (Standby)
(page 13).
MAIN POWER switch
Use to switch the main power of the unit ON and OFF.
AC IN
Use to connect the supplied power cord to an AC outlet
(page 14).
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16 Ω (page 13).
SPEAKER
L
8Ω ~16Ω
+
=
INPUT2
OUTPUT
DIGITAL RGB
AUDIO
AUDIO
DVI-D
7
8 9
9
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdp-434cmx

Table of Contents