Part Names And Functions; Main Unit - Pioneer PDP-50MXE1 User Manual

Part Names and Functions

Main unit

Main unit
PDP-50MXE1/
PDP-50MXE1-S
3 4 5
Main unit
1
Display stand
2
Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 8).
3
Ambient light sensor
This sensor measures the level of light inside the
viewing room; it is enabled when the [ENERGY
SAVE] option is set to [AUTO] (page 31).
4
ON indicator
Lights green when the plasma display is operating
(page 19).
When flashing, the indicator is used to indicate error
messages (page 36).
The indicator flashes green once every one second
when the [POWER MANAGEMENT] function is
operating (page 24).
5
STANDBY indicator
Lights red when the unit is in standby mode (page 19).
When flashing, the indicator is used to indicate error
messages (page 36).
6
Handles
The plasma displays PDP-50MXE1/PDP-50MXE1-S and
PDP-43MXE1/PDP-43MXE1-S utilize differing methods
of handle attachment, but the handles themselves are
used in the same way (page 11).
6
En
PDP-43MXE1/
PDP-43MXE1-S
6
6
1
2
Operation panel on the main unit
7
8
9
0
-
=
~
!
Operation panel on the main unit
-
Note
When optional speakers have been connected,
the operation panel on the main unit will not be
operable.
STANDBY/ON button
Press to put the display in operation or standby mode
(page 19).
INPUT button
Press to select the input (page 19).
MENU button
Press to open and close the on-screen menu (pages
16 to 33).
ADJUST ( / / / ) buttons
Use these buttons to move the onscreen cursor
between selection options, and to perform
adjustments. Instructions for use are given with each
command option onscreen (pages 16 to 33).
VOLUME (+/–) buttons
When not indicated for use in onscreen menu items,
these buttons are used for adjusting the sound
volume (pages 19 and 20).
SET/DISPLAY button
Use to confirm onscreen menu selections, and to
change settings (pages 16 to 33).
When not indicated by onscreen menus, used to
display the current set status (page 20).
SCREEN SIZE button
Press to select the screen size (page 21).
AUTO SET UP button
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
values (page 26).
7
8
9
0
=
~
!