Part Names And Functions; Main Unit - Pioneer PDP-425CMX Operating Instructions Manual

Part Names and Functions

Main unit

Main unit
Operation panel on the
main unit
DISPLAY
STANDBY/ON MENU
/ SET
6 7 8
Main unit
1
Display stand
2
Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 8).
3
Ambient light sensor
This sensor measures the level of light inside the
viewing room; it is enabled when the [ENERGY
SAVE] option is set to [AUTO] (page 30).
4
STANDBY/ON indicator
When the unit is operating:
The indicator lights green (page 18).
When flashing, the indicator is used to indicate error
messages (page 38).
The indicator flashes green once every one second
when the [POWER MGT.] function is operating (page
23).
When the unit is in standby mode:
The indicator lights red (page 18).
When flashing, the indicator is used to indicate error
messages (page 38).
5
Handles
6
En
INPUT SCREEN SIZE – VOL +
9 0 -
1
5
Operation panel on the main unit
6
STANDBY/ON button ( )
Press to put the display in operation or standby mode
(page 18).
7
MENU button
Press to open and close the on-screen menu (pages
16 to 35).
8
DISPLAY/SET button
Use to confirm onscreen menu selections, and to
change settings (pages 16 to 35).
When not indicated by onscreen menus, used to
display the current set status (page 19).
9
INPUT (') button
Except when menu screen is displayed, this button
operates to change the input.
0
SCREEN SIZE (') button
Except when menu screen is displayed, this button
operates to change the screen size.
-
VOL +/– (}/]) buttons
When not indicated for use in onscreen menu items,
these buttons are used for adjusting the sound
volume (pages 18 and 19).
2
STANDBY
ON
3 4