Front Pillar Removal - Mazda 2002 6 Bodyshop Manual

FRONT PILLAR REMOVAL

1. Rough cut area (A), drill the 35 weld locations indicated by (B), then remove the lower part of the front pillar
outer.
2. Rough cut area (C), drill the 20 weld locations indicated by (D), and 2 weld locations indicated by (E), then
remove the front pillar.
Note
• If removing the front pillar reinforcement and the front pillar inner as separate parts, drill 8 locations
indicated by (F) and drill 30 locations indicated by (G).
III–12
PANEL REPLACEMENT
A6E981274090B01
A6E9812B011