Mazda 2002 6 Bodyshop Manual page 90

Hide thumbs Also See for 2002 6:

Table of Contents

2. Weld the damaged area.

• For repair of a cracked area, melt the crack together with a heat gun and a melting attachment.

• For repair of a hole, degrease the area on both sides of the bumper and apply aluminium tape on the

reverse side of the damage area.

3. Melt the polypropylene welding rod with a heat gun and deposit it the cracked area.

Note

• Heat the shaded area to melt it.

• Take care not to overlay melt welding rod. If the part is welded with the welding rod melted like jelly, the

welding strength will be reduced.

• Hold the heat gun 10—20 mm {0.39—0.79 in} from the part being welded.

• Do not move the welding rod until the welded parts cool.

VI–6

PLASTIC BODY PARTS

ZUA9818B003

ZUA9818B005

ZUA9818B004

ZUA9818B006

Table of Contents

Chapters

Table of Contents