Table of Contents
Advertisement
13.
Connecting to other equipment
Saving still pictures and motion pictures on a
Recorder
Dubbing with non-compatible equipment
∫
You can dub the content played back using this camera to non-compatible equipment such
as recorders and video players by connecting the camera to the non-compatible
equipment using an AV cable.
Non-compatible equipment will be able to play back the content. This is convenient if you
wish to pass around dubbed content. In this case, the content will be played back in
standard rather than high-definition picture quality.
1
Connect the camera with the
recording equipment with an AV
cable.
2
Start the playback of the camera.
3
Start the recording on the recording
equipment.
•
When ending the recording (copying),
stop the playback on the camera after
stopping the recording on recording
equipment.
•
When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV Aspect]
the camera to [4:3] before starting a copy. The image will be vertically long if you play back
motion pictures copied with [16:9] setting on a [4:3] aspect TV.
•
Use only AV cables that comply with the respective standards.
•
See the instructions for the recording equipment for details about copying and playing back.
1 Yellow: to the video input socket
2 White: to the audio input socket
A AV cable
B [AV OUT/DIGITAL] terminal
•
The color of the terminal is gold.
283
(P51)
on
Advertisement
Table of Contents
