Saving The Recorded Still Pictures And Motion Pictures; Copying The Playback Image Using An Av Cable - Leica V-LUX 2 Instructions Manual

Saving the recorded still pictures and motion
pictures
Methods to export still pictures and motion pictures to other devices will vary depending on
the file format. (JPEG, RAW, AVCHD, or Motion JPEG). Here are a few suggestions.

Copying the playback image using an AV cable

File formats that can be used: [AVCHD], [Motion JPEG]
Copy images played back with the camera to DVD disc, hard disk, or video using a DVD
recorder, or video.
This can be played back with equipment that is not compatible with high definition
(AVCHD), so it is convenient for distributing copies. Image will be standard quality instead
of high definition at this time.
MIC
REMOTE
1 Connect the camera with the recording equipment with an AV cable (supplied).
2 Start the playback of the camera.
3
Start the recording on the recording equipment.
•
When ending the recording (copying), stop the playback on the camera after stopping the
recording in recording equipment.
Note
•
When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT]
on the camera to [4:3] before starting a copy. The image will be vertically long if you play back
motion pictures copied with [16:9] setting on a [4:3] aspect TV.
•
Do not use any other AV cables except the supplied one.
•
It is recommended to turn off the display of the screen by pressing the [DISPLAY] on the
camera while copying.
•
See the instruction manual for the recording equipment about the details of copying and playing
back.
Connecting to other equipment
(P66)
- 189 -
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A AV cable (supplied)
(P37)