Table of Contents
Advertisement
1
.
Before Use
Care of the camera
Do not subject it to strong vibration, shock, or pressure.
•
The lens, monitor, or external body may be damaged if used in the
following conditions.
It may also malfunction or the image may not be recorded if you:
–
Drop or hit the camera.
–
Exert pressure on the lens or the monitor.
•
When the camera is not in use or when using playback, ensure that
the lens is in the stored position, with the lens cap attached.
•
There are times when the camera will emit rattling sounds or
vibrations, but these are due to the diaphragm operation, the lens'
zoom function and the motor and do not indicate a defect.
This camera is not dust/splash/water proof.
Avoid using the camera in places with a lot of dust, water, sand,
etc. such as when using it on a rainy day or at the beach.
•
Liquids, sand and other foreign material may enter through the gaps
around the lens, the buttons, etc. Be particularly careful since it may not
just cause malfunctions, but it may also cause irreparable damage.
About Condensation (When the lens, the viewfinder or
∫
monitor is fogged up)
•
Condensation occurs when the ambient temperature or humidity
changes. Try to avoid this since it may cause lens, viewfinder and
monitor stains, fungus and camera malfunction.
•
If condensation occurs, turn the camera off and leave it for about
2 hours. The fog will disappear naturally when the temperature of
the camera is similar to the ambient temperature.
12
Advertisement
Table of Contents
