Hd Sd; Interconnection Diagram - Helios 3120HD Series Operation Manual

1.6 3920 /3920

Interconnection Diagram

HD SD
Figures 4 and 5 show interconnection diagrams for the 3920
• Figure 4 shows a setup of the camera system using IP output.
• Figure 5 shows a setup of the camera system using analog and IP output.
NOTE: If your PC has a GigE network interface, you can bypass the switch and plug the camera system
RJ45 cable directly into the GigE port on your computer.
These diagrams represent typical installations. Each installation site will have its own unique requirements.
Default IP Address
192.168.2.150
Cable Shield(s)
Power
Default IP Address
192.168.2.150
Cable Shield(s)
Earth
Ground
Power
Coax Cable
Analog
Monitor
Figure 5. Interconnection Diagram, Analog and IP Output
6X-1090J
Properly secure the camera system
before the power is applied.
System Cable
CAT5e Router/Switch
Cable
Earth
Ground
Figure 4. Interconnection Diagram, IP Output
Properly secure the camera system
before the power is applied.
System Cable
Router/Switch
CAT5e
Cable
Serial Cable
RS-232/422 Converter
Direct plug-in
to computer
serial port
/3920 series cameras:
HD SD
Router/Switch
WAN
LAN
Network
Switch
Router/Switch
WAN
LAN
Network
Switch
9