Table of Contents
Advertisement
1.0 Getting Started
NOTE: All graphics contained within this document, including screenshots and other displays, are for reference use
only and are subject to change.
Installation and testing of the camera system can be performed with the built-in Helios Web Interface ap-
plication.
1.1 Factory Default IP Address and Settings
The camera system is shipped with:
•
Default IP address: 192.168.2.150
•
Subnet mask: 255.255.0.0
•
Gateway: 192.168.2.1
1.2 System Requirements
Bonding and grounding conditions must be met to protect people and equipment.
In order to test the camera system you need the following items:
•
Laptop or desktop computer (for recommended computer specifications see Section 1.3)
•
100/1000BASE-T network card installed in your computer
•
Microsoft Internet Explorer, version 8 or 9
•
100/1000BASE-T network switch
•
Ethernet CAT5e cable
1.3 Recommended Computer Specifications
The following are recommended computer specifications to run and operate a camera system:
•
CPU: Intel i7-860S 2.53 GHz or better
•
Operating system: Windows XP Service Pack 3 (SP3) or better
•
Memory: 4GB DDR3@1066MHz or better
•
Hard Drive: 7200 rpm – minimum speed with sufficient free space
•
Video card: NVIDIA® GeForce® 9800 GTX+ with 512 MB RAM or better, or high-end
ATI Radeon™ HD series
•
Monitor: LCD monitor with 1920 x 1080 or better resolution
•
Web browser: Microsoft Internet Explorer version 8 or 9
6X-1090J
.
CAUTION:
Secure the camera system before the power is applied.
WARNING:
5
Advertisement
Table of Contents
