Table of Contents
Advertisement
2.15 Privacy Mask (Applies to 3120
Privileged User and Administrator are allowed to configure the privacy masks.
Privacy Masks are used to conceal user-defined privacy areas.
Below are steps for setting a privacy mask:
•
Click the Privacy tab from the left side menu on the Home page. The
Privacy window appears.
•
Check the Enable Privacy Masks box to enable the privacy mask
function.
•
Check the Enable Mask Edit Mode box to activate the Editing Mode,
which allows the user to draw, edit and delete privacy masks:
•
To draw a privacy mask:
•
•
•
•
•
•
To edit the privacy mask:
•
•
•
To hide the privacy mask:
•
•
•
To delete a privacy mask:
•
•
•
To delete all privacy masks:
•
•
Uncheck the Enable Mask Edit Mode box to activate the Active Mode. The privacy masks
appear in blue color.
•
Click the Save button to save the configuration.
Enable Privacy Masks: Check/uncheck the box to:
•
Enable/disable the privacy mask function.
•
Show/hide all existing privacy masks.
Enable Mask Edit Mode: Check/uncheck the box to enable/disable the drawing or editing of the privacy
masks. When the Enable Mask Edit Mode box is checked, the privacy masks' color is green.
Move: Check the button before moving the camera to the desired location.
Draw: Check the button before drawing the mask.
Enable: Check/uncheck the box to enable/disable the selected privacy mask.
Delete: Use the button to delete a selected mask from the pull-down mask menu.
Delete All: Use the button to delete all privacy masks.
Save: Use to save the present configuration.
6X-1090J
/3930
HD
HD
Select the mask name (e.g. Mask 01) from the pull-down menu.
Select the Move button to use the mouse to pan to the desired location.
Select the Draw button.
Press the left mouse button (LMB) and drag the mouse to draw a yellow frame
around the area to be concealed. When the LMB is released, the privacy mask will
appear as a green rectangle.
Repeat the step to create up to four privacy masks for the fixed cameras and up to
eight masks for cameras with the pan/tilt support. Only four masks can be created
in a single field of view (FOV). See notes below for additional restrictions.
Choose the desired mask from the pull-down menu. The camera will move to the
mask location.
Draw a mask in a different location.
Choose the desired mask from the pull-down menu.
Uncheck the Enable box.
Choose the desired mask from the pull-down menu.
Click the Delete button.
Click the Delete All button.
with 720p30x Zoom In)
57
Advertisement
Table of Contents
