Table of Contents
Advertisement
2.10 Sector (Applies to 3960
Privileged User and Administrator are allowed to configure sectors.
A sector is a programmed pan area with set boundaries and an identifying label.
•
System supports 16 sectors.
NOTE: For a sector label to be displayed, Sector/Privacy Zones element must be selected in the OSD Configura-
tion Menu.
To establish the sector follow the next steps:
•
Click the Configuration button from the camera configuration/control
menu. The Configuration window will appear.
•
Click the OSD button.
•
Select the Sector/Privacy Zone element from the pull-down menu.
•
Save or Apply configuration. Close the configuration window.
•
Click the Sector button from the camera configuration/control menu.
•
Select the desired sector number from the Sector drop-down menu.
•
Check the box Enable ID.
•
Type the name of the sector in the name box. Click the Set button.
•
Pan the camera to the left edge of the area to be labeled. Click the
Left Limit button.
•
Pan the camera to the right edge of the area to be labeled. Click the
Right Limit button.
•
To turn off the selected sector, clear the box labeled Enable.
•
Use the Delete button to clear the sector.
•
Use the Delete All button to clear all sectors that have been set.
NOTE:
•
Tilt and zoom positions have no effect on sector labeling.
6X-1090J
/3960
/3920
/3920
HD
SD
HD
SD
/5970
/3120
)
SD
HD
49
Advertisement
Table of Contents
