Table of Contents
Advertisement
2.1.1 Video Control Area
The video control area is used for viewing video as well as allowing mouse control of the camera.
Changing the Video Display
The video display can be expanded to the full screen by clicking the F11 key on the keyboard. To exit from
full screen display, press F11 again.
To close the control area, move the mouse pointer over video viewing area and double click the right mouse
button. To bring the control area back, double-click the right mouse button again.
Pan, Tilt, and Zoom (PTZ)
•
Pressing down the left mouse button and dragging the mouse allows user to control pan and tilt
functions.
•
Rolling the mouse wheel allows user to zoom in and out.
•
When the camera optical zoom is at its maximum, further zoom in commands will enter digital zoom
mode. Zoom out commands affect optical zoom after digital zoom is at its minimum.
2.1.2 Live Video Control
1. Start/Pause Live Video Button: Starts/pauses Live Video stream.
2. Stop Video Display Button: Stops Live Video activity and returns to the Nothing Loaded screen.
2.1.3 LED Indicators
Three LED indicators are located in the right top corner of the video area:
•
Right LED glowing solid green indicates that a live video connection is established.
2.1.4 On-Screen Display
The OSD (On-Screen Display) menu allows the user to display the text overlays such as Camera Title,
Date Time, Preset, Az/Elev/Zoom, Event, etc.
OSD elements are displayed on the left side of the image (top or bottom). A logo is displayed on the right
side of the image (top or bottom) for the standard font size. See Section 2.2.1.4. Up to four OSD elements
are selectable for inclusion in the camera's two IP video streams. Three elements are maximum on a single
stream.
20
1
2
6X-1090J
Advertisement
Table of Contents
