Table of Contents
Advertisement
Assigning the New Camera IP Address
No two devices on a single Ethernet network can have the same IP address. Use the following steps to
change a Camera IP address before a second camera is added to the subnet.
•
Set your computer IP address to the same subnet as the Camera IP address.
IMPORTANT: In order to make changes in camera configuration the user must be logged in as Administra-
tor.
•
Change the Camera address. The Camera address can be changed manually or through a Dy-
namic Host Configuration Protocol (DHCP) server. See Operation Manual 6X-1090.
•
Click the Camera Setup button.
•
Click the Configuration button.
•
Click the Communication tab.
The Communications tab is used for performing network configuration of the Camera. Changes to this tab
can only be made by the Admin account. Care must be taken when modifying parameters on this page as
the changes can make the camera inaccessible through the network. Consult with your network adminis-
trator before starting to assign new network settings to ensure that your camera won't conflict with other
devices.
•
Write down the new camera address to make the camera easy to find later. If the camera IP ad-
dress becomes lost, use the CohuONVIFDiscovery software to find the camera on a network. The
software is available as a free download at
Software & Protocol Downloads > Setup Test Applications > Helios and 7500 Camera Series Dis-
covery Tool click "download now". See Section 4.6.
•
6X-1090J
http://www.CohuHD.com/content/downloads.
Under
17
Advertisement
Table of Contents
