Logo Files
Logo File Limitations:
•
HD: 96 x 96 pixels in size; .bmp format; required to be at 32 pixel boundary for both length and
width.
•
SD: 64 x 64 pixels in size.
Logo 1: Applies to Stream 1. Check the box to load a logo. Browse to find the file. Click the Load button.
Logo 2: Applies to Stream 2. Check the box to load a logo. Browse to find the file. Click the Load button.
Default: Restores the settings to the factory settings, but does not save or apply them.
Revert: Resets the settings to the previously unsaved settings.
Apply: Applies changes without making them permanent. Resetting the camera will restore the previous
values.
Save: Stores current settings permanently.
2.2.1.5 Time
The user must be logged in as Administrator in order to make changes in the Time tab.
•
Click the Setup button.
•
Click the Configuration button.
•
Click the Time tab.
The Time menu allows user to syn-
chronize a camera clock with computer
systems.
Camera Time: Cannot be changed. The
line displays the current Camera time.
Sync to: Two options are available:
PC: Check the PC button to synchronize
the time of the camera with the clock of
your computer.
NTP (Network Time Protocol): Check
NTP button to synchronize the time of the
camera with the time of the server run-
ning NTP.
IMPORTANT: If the camera time is synchronized through NTP, it will get time directly from the server when
rebooted. If the camera is synchronized to a PC, the synchronization process must be repeated after the
camera is rebooted. Synchronization with the NTP server is the recommended method.
NTP Server 1: Type the server IP address.
NTP Server 2: Type the backup server address.
Time Format: Choose 12 or 24 hour clock from the pull-down menu.
Time Zone: Choose time zone from the pull-down menu.
Daylight Savings: Check the box if daylight savings time applies.
Default: Restores the settings to the factory settings, but does not save or apply them.
Revert: Resets the settings to the previously unsaved settings.
Save: Stores current settings permanently.
6X-1090J
27