Setup; Configuration - Helios 3120HD Series Operation Manual

2.2 Setup

With appropriate user permission, Setup menu allows you to change the network
settings, properties settings and upgrade firmware.
Click the Setup button to display buttons from the drop-down menu:
• Configuration. See Section 2.2.1.
• Change Password. See Section 2.2.2.
• Properties. See Section 2.2.3.
• Upgrade. See Section 2.2.4.
If you are logged in as the Administrator (Admin), you will be able to see all four buttons: Configuration,
Properties, Change Password, Upgrade.
If you are logged in as the Privileged User (Priv), you will be able to see the first three buttons: Configura-
tion, Properties, Change Password.
If you are logged in as the User, you will be able to see two buttons: Properties and Change Password.
If you are logged in as the Guest, you will be able to see one button: Change Password.

2.2.1 Configuration

This button is available for the Admin user to make changes in the camera networking settings.
Click the Configuration button to display the camera configuration window with six tabs. The tabs provide
pages which allow user to configure the camera.
At the bottom of each page four buttons are displayed:
• Default: Restores the factory default settings.
• Revert: Resets the settings to the previously unsaved settings.
NOTE: After saving the button will not restore the previous values.
• Apply: Allows user to apply changes without making them permanent. Resetting the camera will
restore the previous values.
• Save: Stores current settings permanently.
6X-1090J 21