Table of Contents
Advertisement
Upgrading The Computer
Fan Cable
Make sure you recon-
nect the fan cable
before screwing down
the bay cover.
6
Figure 6 - 5
Removing the RAM
& CPU Cover
6 - 6 Upgrading the Optical (CD/DVD) Device
Upgrading the Optical (CD/DVD) Device
1.
Turn off the computer, and turn it over and remove the battery.
2.
Models A & C: Locate the RAM & CPU bay cover and remove screws
3.
Carefully (a fan and cable are attached to the under side of the cover) lift up
the bay cover.
4
4.
Carefully disconnect the fan cable
OR
5.
Models B & D: Locate the hard disk bay cover and loosen screws
6.
Remove the hard disk bay cover
, and remove the cover
4
.
3
3
2
1
Models A & C
5
4
.
5
&
1
Models B & D
Models B & D
1
2
3
-
.
1
3
.
2
Advertisement
Table of Contents
