Table of Contents
Advertisement
3.5G Module
If you have included an optional 3.5G module in your purchase option follow the instructions
install the USIM card (which will be provided by your service provider), and then install the application.
Before installing the application, make sure that the 3.5G module is on. Use the Fn +
"Function Keys/Hot Key Indicators" on page E -
3G Watcher Application Installation
1. Enable power to the module by pressing the Fn +
indicate the module's power status).
2. If a Found New Hardware Wizard appears, click Cancel.
3. Insert the Device Drivers & Utilities + User's Manual disc into the CD/DVD drive.
4. Click Option Drivers (button).
5. Click 3.Install 3G Driver > Yes.
6. Click Next.
7. Click the button to accept the license agreement, and then click Install.
8. When the next screen appears wait (about 2 minutes) until the 3G Watcher application appears on
screen (as per
Figure 7 - 11 on page 7 -
the 3.5G module).
9. You can access the 3G Watcher application from the Start menu (Start > Programs/All Programs >
Sierra Wireless > 3G Watcher), or by clicking the desktop icon
10. See
"Setting Up a Carrier Profile" on page 7 - 17
page 7 - 19
for instructions on using the 3G Watcher application.
5) to toggle power to the 3.5G module.
key combination (the on screen icon
16) before clicking Finish (this allows the hardware to detect
and
"Connecting to the Service Provider" on
Windows XP Information
on page 7 - 14
key combination (see
.
3.5G Module E - 49
to
will
E
Advertisement
Table of Contents
