Table of Contents
Advertisement
Attaching Other Displays
Besides the built-in LCD you can also use an external monitor/flat panel display/TV
(TV through HDMI-Out port only), connected to the external monitor port or to the
HDMI-Out port (High-Definition Multimedia Interface) as your display device. The
following are the display options:
1.
The built-in LCD OR an external monitor/flat panel display connected to the exter-
nal monitor port or HDMI-Out port (Single Display).
2.
The built-in LCD AND an external monitor/flat panel display connected to the
external monitor port or HDMI-Out port (Multiple Display).
Configuring Other Displays from Windows Vista
1.
Attach your external display to the external monitor port or HDMI-Out port, and
turn it on.
2.
Go to the Windows Mobility Center control panel (Mobile PC > Adjust
commonly used mobility settings) and click Connect display.
3.
Click on any of the buttons to configure the displays to your preference, or click
Display Settings to access the control panel.
Intel Video Driver Controls
Display Devices
You can use the Fn + F7
key combination (see
page
B -
through the display op-
tions.
• The built-in LCD.
• An external display
connected to the DVI-
Out port.
• An external display
connected to the
HDMI-Out port.
Note that HDMI sup-
ports video and audio
signals.
Figure B - 4
Windows Mobility
Center & New
Display Detected
Attaching Other Displays B - 5
8) to toggle
B
Advertisement
Table of Contents
