Upgrading The Hard Disk Drive - Pro-Star m762ETU A User Manual

Upgrading The Computer
HDD System
Warning
New HDD's are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
6
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 2
Hard Disk Bay
Cover Removal

6 - 4 Upgrading the Hard Disk Drive

Upgrading the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard
disk drives with a height of 9.5mm (h) (see
operating system's installation instructions, and install all necessary drivers and util-
ities (see "Driver Installation" on page 4 -
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and loosen screws
3. Remove the hard disk bay cover
Models A & C
1 2
3
"Storage" on page D -
2), when setting up a new hard disk.
& .
1 2
.
3
Models B & D
1 2
3
3). Follow your