Table of Contents
Advertisement
Windows XP Information
To Enable Intel(R) Dual Display Clone (Intel GMA)
1.
Attach your external display to the external monitor port or HDMI-Out port, and turn it on.
2.
Go to the Intel GMA control panel and click Display Devices.
3.
Click to choose Intel(R) Dual Display Clone from the Operating Mode menu.
4.
Choose which device is to be the Primary Device from the Display Selection menu.
5.
Click Apply, and OK to confirm the settings change.
6.
Click Display Settings to adjust the settings for the attached devices.
E
E - 12 Intel GMA Driver Controls
Figure E - 9
- Display Devices - Intel(R) Dual Display Clone
Advertisement
Table of Contents
