Table of Contents
Advertisement
Intel Video Driver Controls
Figure B - 7
Display Devices &
Settings
B
B - 10 Display Modes
To Enable Intel(R) Dual Display Clone
1.
Attach your external display to the external monitor port or HDMI-Out port, and
turn it on.
2.
Go to the Intel(R) GMA Driver for mobile control panel (see
Properties" on page B -
3.
Click to choose Intel(R) Dual Display Clone (Operating Mode).
4.
Choose which device is to be the Primary Device/Secondary Device from the
Display Selection menu.
5.
Click Apply, and OK to confirm the settings change.
6.
Click Display Settings to adjust the settings for the attached devices.
2) and click Display Devices.
"Intel Graphics
Advertisement
Table of Contents
