Notebook Ports And Jacks - Pro-Star m762ETU A User Manual

Interface (Ports & Jacks)

Notebook Ports and Jacks

Item
Card Reader Port
DC-In Jack
e-SATA Port
e-SATA
A
External Monitor (VGA)
Port
A - 2 Interface (Ports & Jacks)
The card reader allows you to use some of the latest digital storage cards. Push the card into the
slot and it will appear as a removable device.
Plug the supplied AC/DC adapter into this jack to power your computer.
Plug external Serial ATA hard drives into this e-SATA (external Serial Advanced Technology
Attachment) port.
Not: The eSATA port only supports hot-swapping if you have selected AHCI mode in SATA Mode
Selection in the BIOS (see "SATA Mode & eSata Port" on page 5 -
mode, then hot-swapping devices connected to the eSATA port is not supported. You will need to
install the Intel Matrix Storage driver to enable the e-SATA port (see
page 7 - 29).
Note that hot-swapping is NOT supported in the Windows XP O/S.
This port allows you to connect an external monitor, or Flat Panel Display, to get dual video or
simultaneous display on the LCD and external monitor/FPD.
Description
8). If you have selected IDE
"e-SATA Port Support" on