Table of Contents
Advertisement
Windows XP Information
HDMI Connection
(NVIDIA WinXP)
Note for external dis-
plays connected to the
HDMI-Out port:
If you disconnect the
HDMI cable, and later
reconnect it, you will
then need to go to the
NVIDIA Control Panel
to reconfigure the con-
nected displays in either
Clone/Extended Mode.
E
E - 16 NVIDIA Video Driver Controls
Display Devices and Modes (NVIDIA)
Besides the built-in LCD you can also use an external monitor/flat panel display/TV
(TV through HDMI-Out port only), connected to the external monitor port or to the
HDMI-Out port (High-Definition Multimedia Interface) as your display device. The
following are the display options:
nView Display Mode
Single
Clone
Dualview
See
"HDMI Audio Configuration" on page E - 19
audio when setting up an HDMI display as an external device.
Description
One of the connected displays is used as the display
device
Both connected displays output the same view
Both connected displays are treated as separate
devices, may be configured independently and act
as a virtual desktop (this is similar to Extended
Desktop in Windows)
Table E - 3
- Display Modes
for instructions on configuring
Advertisement
Table of Contents
