Kenmore 141.16688800 Use And Care Manual page 23

4. Installthe AC (alternating current) R otisserie Motorontothe MotorBracket a s shown below.Be sure
the Motorattachesto the Bracket w ith the electrical c ord down.This installation insures that once
the Spit is insertedinto the Motorit will also rest securelyinto the slot of your grill bowl.
Rotisserie Motor
//
Motor Bracket -j
Spit must rest securely
in the slot of your gdfl bowl.
,
Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the right
side of your grill. Place the Bushing into the slot opening on the left side of your grill bowl, then
tighten the Collar Thumbscrew to the right of the Bushing. The Collar will stabilize the Rotisserie during
the cooking process and the Bushing allows the Rotisserie Spit to turn smoothly. Plug the Rotisserie
into an outlet and turn on to test.
Motqr Holding Forks Thumbscrew
Thumbscrew
/
/
Y
/
, J ..... R hin _us_.n_
\\\ / , /
\\ /
, r
The Bushinq and Collar must always be used with this Rotisserie.
BEFORE rotisserie cooking you will need to remove the Cooking Grid(s) and possibly the Heat Diffuser(s)
from your grill. When rotisserie cooking place a Cooking Pan under the food to be cooked. This will
capture the drippings and keep your grill clean of excess grease which could cause a fire. Use caution
when moving a Cooking Pan containing hot oils.
23