Advertisement
Available languages
Available languages
NOTE about LP Gas Tank Exchange
Programs
•
Many retailers that sell grills offer you the option of
replacing your empty LP Gas tank through an ex-
change service. Use only those reputable exchange
companies that inspect, precision fill, test and certify
their tanks. Exchange your tank only for an OPD safety
feature-equipped
tank as described in the LP Gas tank
section of this guide.
• Always keep new and exchanged LP Gas tanks in an
upright position during use, transit or storage.
•
Leak test new and exchanged
LP Gas tanks BEFORE
connecting one to your grill.
How to Leak Test your LP Gas Tank
For your safety:
All leak tests must be repeated each time your LP
Gas tank is exchanged or refilled.
When checking for gas leaks do not smoke.
Do not use an open flame to check for gas leaks.
Your grill must be leak tested outdoors in a well-
ventilated area, away from ignition sources such as
gas fired or electrical appliances.
During the leak test,
keep your grill away from open flames or sparks.
Do not use household
cleaning agents. Damage to
assembly
components
can result.
gas
[]
[]
[]
Use a clean paintbrush and a 50/50 mild soap and
water solution.
Brush soapy solution onto LP Gas tank in the
areas indicated by the arrows. See diagram.
If growing bubbles appear do not use or move the
LP Gas tank. Call an LP Gas Supplier or your Fire
Department.
LP Gas
Model
only:
Secure
a 201b
LP Gas
Tank
to Gas
Grill
[]
Turn your LP Gas Tank Valve clockwise to the
closed or OFF positon.
[]
Open the door and unscrew the Wing Bolt from
right bracket of tank holder.
[]
Place LP Gas tank into tank holder.
Be sure
bottom
of tank fully rests in cutout in bottom
shelf.
[]
Install the tank so the Tank Valve faces the rear
right corner of cabinet.
[]
Align and screw the Wing
Bolt into right bracket
of tank holder to secure the gas tank.
Attach the Regulator with Hose to the gas tank.
i
i
/
One Nut
is fixed
to
Tank Holder.
An
additional
Nut and
Wing
Bolt
is secured
AFTER
inserting
tank
into
tank hole.
Tank
Holder
Additional
Nut
Tank
tray
If growing
bubbles
appear
do not use or move
the LP Gas tank.
Contact
an LP Gas Supplier
or your fire department!
16
Wing
Bolt 1!4"xl/2"
Qty. 2
Part # S233G0408A
(Already
installed
on the Tank
Holder.)
Advertisement
