Mitsubishi 4G1 Service Manual page 99

Lash adjister
Rocker shaft
for exhaust
Camshaft
Front mark
Cap No.
0
0
No. 2
No. 3
(2) While using a small wire to lightly press the check ball
downward, move the plunger up and down four or five
times to bleed out the air.
(3) Insert the lash adjuster to the rocker arm, being careful not
to spill the diesel fuel. Then use the special tool to prevent
the lash adjuster from falling while installing the rocker arm
and shaft assembly to the cylinder head.
(1) Install the rocker shafts with notches up and toward the
front bearing cap.
(2) The overall length of the left (intake) rocker shaft is 356.5
mm (14.04 in.); that of right (exhaust) rocker shaft is 350
mm (13.78 in.).
for intake
Rocker cover
attaching
bolt hole
0
0
No. 4
TSB Revision
LASH ADJUSTER IiUSTALLATlON