Mitsubishi 4G1 Service Manual page 359

TURBOCHARGER
DISASSEMBLY AND REASSEMBLY
Snap pin
2. Turbocharger waste gate actuator
3. Coupling
4. Turbine housing
7. 0-rina
8. Combressor cover
INSPECTION
TURBOCHARGER
it operates freely.
or blockage.
(3) Clean the inlet section of the compressor cover with a rag.
Inspect it for signs of contact with the compressor turbine.
If worn, replace it.
REASSEMBLY SERVICE POINTS
O-RING INSTALLATION
(1) Apply a light coat of engine oil to a new O-ring and fit it in
the groove of the turbine wheel assembly.
O-ring
TSB Revision
I