Recalling A Stored Route—Beware Of Possible Obstructions To Navigation - MotorGuide Pinpoint User Manual

PRODUCT INSTALLATION AND OPERATION
Avoid serious injury from colliding with other boats, running aground, or striking
objects in the water. The Pinpoint GPS system cannot detect other boats, shallow
water, or objects in the water. Always beware of possible obstructions to navigation
when operating in any Pinpoint GPS mode.
Recalling a stored route—Beware of possible obstructions to navigation
If the selected memory position is empty, or if the boat is over 1.6 km (1 mile) from a
point on the selected route, the trolling motor will emit an error tone and exit the route
mode.
IMPORTANT: If the trolling motor loses the GPS signal while in any GPS mode, the
trolling motor will emit an error tone and automatically return to manual mode.
When recalling a stored route, the trolling motor will navigate to the nearest point on
the route, then travel to the most distant end from the boat's current position. At any
time while traveling along a stored route, the direction of travel can be reversed by
recalling the stored route again. Once you have reached the end of a stored route,
the trolling motor will set anchor in the anchor mode and will emit an ascending chirp
to indicate that the boat has arrived at the end of the stored route.
eng
WARNING
!
21
53022