Setting The Anchor; Exiting Anchor Mode - MotorGuide Pinpoint User Manual

PRODUCT INSTALLATION AND OPERATION
Avoid serious injury from colliding with other boats, running aground, or striking
objects in the water. The Pinpoint GPS system cannot detect other boats, shallow
water, or objects in the water. Always beware of possible obstructions to navigation
when operating in any Pinpoint GPS mode.
a
A spinning propeller, a moving boat, or any solid device attached to the boat can
cause serious injury or death to swimmers. Stop the trolling motor immediately
whenever anyone in the water is near your boat.

Setting the Anchor

Press the anchor mode button to place the system in anchor mode. When the
anchor mode button is pressed, the system will lock onto the fixed GPS position at
the moment that the button was pressed. The trolling motor will emit one ascending
chirp to indicate its status in anchor mode, and the GPS status indicator light will blink
slowly.
While anchor mode holds the boat in the selected position, the boat may rotate or
pivot around the trolling motor's steering axis. The orientation of the boat will follow
the wind and/or current.

Exiting Anchor Mode

Press the anchor mode button again or press the manual mode button. The trolling
motor will emit a descending chirp and the GPS status indicator light on the trolling
motor will stop blinking and remain on.
WARNING
!
a - Anchor mode
b - Manual mode
b
53018
WARNING
!
14
eng