Carver 2157 MONTEGO Owner's Manual page 38

Section 0 for location of the Cockpit Washdown con­
~
nection}. This system allows utilization ofthe surround ­
ing sea water for cleaning purposes. A special hose is
provided that has two male ends. One end connects to
the cockpit or aft deck female fitting. If desired, a nozzle
can be connected to the other end. After con necting the
hose, activate the pump by means of the Washdown
Switch; normally located in the cockpit area.
Periodically, clean the in-line filter of any debris that
may have accummulated. This filter is located in the
bilge area.
A valve is provided on the Washdown thru-hull water
intake fitting. Be sure this valve is in the open position
when the Washdown System is to be used.
OMSB
G3
CARVER