Programming The Immobilizer System - VESPA LX 125 150 Euro 3 User Manual

When supplementary keys are required, remember that the programming (up to a
maximum of three keys) must be performed on all the keys whether they are new or
already in your possession.
Take the key with the brown grip and all the black keys supplied to an Authorised
Piaggio Service Centre.
The codes of keys not submitted for the new storage procedure are deleted from the
memory. Any lost keys will therefore not be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY
THE SYSTEM CONTROL UNIT.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
SHOULD THE VEHICLE CHANGE OWNERS, IT IS ABSOLUTELY NECESSARY
THAT THE NEW OWNER GET POSSESSION OF THE KEY WITH THE BROWN
GRIP (AS WELL AS ALL OTHER KEYS) AND THE «CODE CARD»

Programming the immobilizer system

Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-
IZER system and/or for storing other key codes.
Procedure start - brown key
Insert the brown key into the key switch (in the «OFF» position), turning it to the
«ON» position. After 1 - 3 seconds, turn the key to «OFF » again and pull it out.
Intermediate step - black key
After extracting the brown key, insert the black key within 10 seconds and promptly
turn it to «ON». After 1-3 seconds, turn the key to "OFF" again and pull it out.
14