Table of Contents
Advertisement
tre. The codes of keys not submitted for the new programming procedure are deleted
from the memory. Any lost keys will therefore not be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
SHOULD THE VEHICLE CHANGE OWNER, IT IS ABSOLUTELY NECESSARY
THAT THE NEW OWNER GET POSSESSION OF THE KEY WITH THE BROWN
GRIP (AS WELL AS ALL OTHER KEYS).
Programming the immobilizer system
Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-
ISER system and/or for storing other key codes.
Procedure start-brown key
Insert the brown key into the switch (in the «OFF» position), turning it to the «ON»
position. After 1 - 3 seconds, turn the key to «OFF » again and pull it out.
Intermediate step-blu key
After extracting the brown key, insert the blue key within 10 seconds and promptly turn
it to «ON». After 1-3 seconds, turn the key to «OFF» again and pull it out.
17
Advertisement
Table of Contents
