Opening The Saddle - VESPA LX 125 150 Euro 3 User Manual

In this way, a maximum of 3 black keys can be programmed by repeating the above
procedure keeping the indicated times.
Final step - brown key
After extracting the last black key, insert the brown key again and turn it to «ON» (carry
out this operation within 10 seconds after extracting the previous key). Leave it in this
position for 1 to 3 seconds and return it to the «OFF» position.
Proper programming check
Insert the brown key disabling the transponder (i.e., by tilting the key hood by 90°),
and turn the key to «ON». Perform the engine start-up operation. Ensure that the
engine does not start. Insert the black key and repeat the start-up operation. Check
that the engine does start.
N.B.
IF THE ENGINE STARTS WITH THE BROWN KEY (AND WITH A DISABLED
TRANSPONDER) OR IF DURING THE PROGRAMMING A WRONG STEP HAS
BEEN CARRIED OUT, IT IS NECESSARY TO REPEAT THE PROCESS FROM THE
BEGINNING.

Opening the saddle (01_12)

Insert the key into the saddle lock «A», turn it anticlockwise and tip the saddle forward.
01_12
15