Table of Contents
Advertisement
Operation
Every time the starter key is removed in the "OFF" or "LOCK" position, the safety
system activates the immobilizer system. Turning the key to "ON" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "OFF" and then to "ON"; if the lock
cannot be disabled, try with the other key supplied (red-coloured). If the engine cannot
be started, contact an Authorised Piaggio Service Centre, which is provided with
the electronic equipment required to detect and repair the system. The Immobilizer is
also activated by switching off the engine with the RUN OFF switch. This happens
even if the starter key is in «ON».
When additional keys are required, please note that data storage (up to 3 keys max.)
must be done on all keys, both new ones and existing ones. Take your scooter to an
Authorised Piaggio Service Centre carrying with you the red-handgrip key and all
the blue keys in your possession. The codes of keys not submitted for the new pro-
gramming procedure are deleted from the memory. Any lost keys will therefore not be
enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED TO ANOTHER PERSON,
THE KEY WITH THE RED GRIP (AS WELL AS THE OTHER KEYS) AND THE
"CODE CARD" MUST BE ALSO TRANSFERRED TO THE NEW OWNER.
Programming the immobilizer system
Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-
ISER system and/or for storing other key codes.
17
Advertisement
Table of Contents
