Gator 20.8 Breakaway Installation - Mercury MotorGuide VariMAX Manual

2. Place the pontoon mount base on the surface of the boat deck. Use
the mount base as a template to mark the location of the mount
holes.
IMPORTANT: Using a larger drill bit, countersink the holes on
fiberglass boats to prevent the gel‑coat from cracking.
3. Drill the mounting holes with a 7 mm (1/4 in.) diameter drill bit.
Remove any debris.
4. Install four stainless steel washers and locking nuts onto the
mounting screws underneath the boat deck. Tighten securely.

Gator 20.8 Breakaway Installation

IMPORTANT: Choose an area on the deck which allows a 7.6 cm
(3 in.) clearance between the column and the bow of the boat for all
motor positions.
MOUNT INSTALLATION
Pontoon mount holes
Gator 20.8 Breakaway
37927
22
37805
eng