Table of Contents
Advertisement
MAINTENANCE AND STORAGE
EVERY 100 HOURS OF USE OR ANNUALLY
•
Periodically lubricate all the pivot points with a nonaerosol,
nonsolvent based lubricant.
IMPORTANT: Never use an aerosol lubricant to grease or oil any part
of the unit. Many aerosol lubricants contain harmful propellants that
can cause damage to various parts of the trolling motor.
Tube Ref
Description
No.
2-4-C with Teflon
95
•
Check the tightness of bolts, nuts, and other fasteners.
•
Inspect the battery. Refer to Battery Inspection.
Storage Preparation
The major consideration in preparing your trolling motor for storage is
to protect it from corrosion and damage caused by freezing of trapped
water.
Refer to the Inspection and Maintenance Schedule and complete the
appropriate care instructions to prepare your trolling motor for storage.
Store the trolling motor in a dry location where it will not be affected by
temperatures below ‑29 °C (‑20 °F).
IMPORTANT: Trolling motors stored in temperatures below 0 °C
(32 °F) should be operated slowly for a minimum of 15 minutes before
going above 30% operation.
Battery Inspection
The battery should be inspected at periodic intervals to ensure proper
trolling motor operation.
IMPORTANT: Read the safety and maintenance instructions which
accompany your battery.
1. Ensure that the battery is secured to the vessel.
2. Ensure that the battery cable terminals are clean, tight, and
correctly installed.
3. Ensure that the battery is equipped with a battery box to prevent
accidental shorting of the battery terminals.
Where Used
Pivot points
38
Part No.
92-802859A 1
eng
Hide quick links:
Advertisement
Table of Contents
