Extended Configuration; Creation Of A Qualified User List - Siemens TEL50.GSM General Instructions Manual

Phone remote control
Table of Contents

Advertisement

Extended configuration

7.
Using the basic configuration already present, the user can customize device parametrization by changing some of the system
parameters via SMS. Carefully note any changes made and keep them with these instructions in order to ensure that the device
is correctly controlled even after a long period of time or by other qualified users.

7.1 Creation of a qualified user list

All the telephone numbers of users (both fixed and mobile), up to a maximum of 20, that have access to the different features
of the device are entered in this section. The numbers entered must have a minimum length of 6 numbers to be considered
valid. If the security parameter is enabled (SECURITY=1) the calls coming from numbers not included in the list will not be
accepted. If there are no configured users or the security parameter is disabled (SECURITY=0), the caller's number will not be
checked. The telephone number and type of user (see below: configuration valid only for commands sent by SMS) must be
entered for each user. All the users in the list will receive notification of temperature alarms (if a remote temperature sensor is
present) and alarms generated by closure of input IN1.
Users can be entered with three different profiles:
Administrator (extension .1)
This type of user has full control of the device and can therefore insert and remove functional parameters, control and check
states of inputs and outputs and receive notification of alarms and temperature readings.
User (extension .2)
This type of user has partial control of the device and can therefore only control and check states of inputs and outputs, receive
notification of alarms and receive temperature readings. He/she cannot change or query functional parameters.
Notify (extension .3)
This type of user has no control of the device and can therefore only receive notification of alarms. TEL50.GSM will not accept
and therefore will not answer to call or SMS coming from this type of user.
Building Technologies
- 18 -
TEL50.GSM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents