Advertisement
Protocol
The following table describes the various fields that appear in PTZ protocol page.
Table 29 Fields in the Protocol Page
Field
Description
Name
PTZ enable User can enable / disable the
PTZ control.
Protocol
Specifies the corresponding
dome protocol
Address
Specifies the corresponding
dome address
Baud rate
Specifies the corresponding
dome baud rate length.
Speed
Specifies the corresponding
dome movement speed
Data , stop
Specifies the data , stop and
, parity bit
parity bit
Default
Set the default PTZ controls
Provide the desired values.
Click APPLY to save all changes.
NOTE: For Custom protocol settings open the following URL:
http://<ip-address>/maintenance/cptz.html
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
Values
Pelco P, Pelco D
Default 1
(1 to 255)
1200, 2400, 4800, 9600
1 to 8
Stop bit 1-2
Data bit 7-8
Parity bit (none, odd ,even)
Page 52 of 62
V1.2
Advertisement
