Advertisement
Figure 5 Power Over Ethernet (POE) Card
Table 4 below describes the various interfaces to the DVE-DM365.
Table 4: DVE-DM365 Interface Description
Interface
Camera Connector
PTZ
Auto IRIS
Ethernet Connector
PoE
Power Input
SD Card Holder
USB
Alarm In
Alarm out
Debug Console
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
Description
Audio in, audio out, video in and video out interfaces
The Pan / Tilt / Zoom (PTZ) menu allows users to pan
(move left and right), tilt (move up and down) and zoom in
and out within a specific area with just a push of a button
and preset positions.
Automatically adjustable iris opening in response to
changes in light levels
Standard RJ-45 Ethernet connector for IP network
connection.
If PoE card is attached it allows transmission of power
and data via a single Ethernet cable.
Power adapter connection. This is a +12V DC inlet, which
connects to an external power supply. To be used if no
PoE is available.
For inserting the SD card to store data directly onto the
card.
USB interface can be used to connect the Wi-Fi USB
Stick or USB 3G dongle
Two alarm ports – input and output available on the back
panel of the camera.
Debug console is used for service and debugging
purposes.
V1.2
Page 11 of 62
Advertisement
