RadiumBoards DVE-DM365 Configuration And User's Manual page 35

8.
CONFIGURE VIDEO SETTINGS
You can configure the video settings such as video encoding and video parameters
by performing the following steps:
 Log on to the network camera to open its Live View page.
 Click the Configuration menu.
 In the left pane, click on the video Settings.
You can configure the video encoding and video parameters and OSD by click on
the video encoding and video parameters button in the video setting menu bar.
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
Page 35 of 62