Advertisement
Select the
The Internet Protocol (TCP/IP) Properties dialog box appears.
Click
mask to 255.255.255.0, where x is a number between 2 and 254, except 168.
Click
to close all windows.
This connects the camera to the network. You can now configure and change the
default settings of the camera as explained in the subsequent chapters.
: If assigning the IP address fails, check that there is no firewall blocking
the operation.
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
checkbox and click
. Set the IP address to 192.168.1.x and subnet
V1.2
.
Page 17 of 62
Advertisement
