Advertisement
Motion Detection
The following table describes the various fields that appear in the video loss Setup
page:
Table 23 Fields in the Action Types Setup Page
Field Name
Motion
detection
Interval (sec)
Sensitivity
Enable FTP
upload
Audio Out
Enabled
Alarm Out
Enabled
Save to SD
Card
Enable Email
(SMTP)
Enable SMS
Provide the desired values.
Click APPLY to save all changes.
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
Description
You can enable / disable the
motion detection by check the
box.
You can select all or remove all
windows by selecting the
appropriate radio button on the
panel.
You can just click the box and
can change any value between
10 to 200.
The detection sensitivity can be
adjusted by selecting from the
sensitivity bar.
Indicates whether to enable
FTP upload feature or not.
Indicates whether to enable
audio sound or not.
Indicates whether to enable
alarm out or not.
Indicates whether to save to SD
card or not.
Indicates whether to enable
email notification feature or not.
Indicates whether to enable
SMS notification or not.
V1.2
Values
Enable/disable
(10 -200)
Page 44 of 62
Advertisement
