5.
CONFIGURE SYSTEM SETTINGS
The system configuration displays all the system information and you can configure
SYSTEM settings by performing the following steps:
Log in to the network camera to open its Live View page.
Click the Configuration menu.
In the left pane, expand the System Settings menu.
Uptime: Indicates the uptime duration from which the DVE is connected.
Serial No.: Specifies the serial number of the DVE.
MAC address: Specifies the MAC address of the DVE.
IP address: Specifies the IP address of the network used by the camera to connect
to that network. IP addresses allow all the connected computers / devices to find
each other and to pass data backward and forward. If you have enabled DHCP, the
IP address is assigned dynamically and automatically by DHCP.
Camera name: Change the camera name by simply clicking on the text field and
typing the new name and then click on apply button at the bottom.
Language: Change the preferred language by clicking on the drop down button
and selecting the particular language you want to select and click on apply button.
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
Page 22 of 62