Advertisement
6.
CONFIGURE NETWORK SETTINGS
The network settings allow you to assign an IP address to the camera. This can
be done either manually or automatically from a dynamic host configuration
protocol (DHCP) server. If you are not using DHCP, provide the IP address,
subnet mask, and default gateway of the camera. If you enable DHCP, a DHCP
request is sent when the camera is turned on. By default static addressing is
enabled.
You can configure NETWORK settings by performing the following steps:
Log on to the network camera to open its Live View page.
Click the Configuration menu.
In the left pane, click on the Network Settings menu.
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
Page 24 of 62
Advertisement
