Advertisement
The following table describes the various fields that appear in the Network page:
Table 7 Fields in the Network Settings Menu
Field Name
Enable DHCP
IP Address
Subnet mask
Default Gateway
Primary and
secondary
DNS
HTTP Port
HTTPS Port
UPnP
Multicast
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
Description
Indicates that you can enable or
disable the DHCP. DHCP supports
static addressing through a
permanent IP address.
Specifies the IP address of the
network used by the camera to
connect to that network. IP
addresses and allow all the
connected computers/devices to
find each other and to pass data
backward and forward. If you have
enabled DHCP, the IP address is
assigned dynamically and
automatically by DHCP.
Specifies the subnet mask or
routing prefix of an address written
in a form identical to that of the
address itself.
Specifies the address of the
default gateway.
Specifies the primary and
secondary server used for
information about a domain as well
as the location of resources
associated with a domain.
Specifies the communications
endpoint for the uniform resource
locator (URL) of a website or other
services.
Specifies the communications
endpoint for the uniform resource
locator (URL) of a website or other
services.
V1.2
Values
-
Default:
192.168.1.168
Default:
255.255.255.0
Default:
192.168.1.254
Default:
192.168.1.1 and
192.168.1.3
Default: 80
Range from 1024
– 65536
Default: 81
Range from 1024
– 65536
Page 25 of 62
Advertisement
