Advertisement
11.
PRIVACY MASKING
Privacy masks are configurable areas of solid color that allow concealment of parts
of the image that should not be viewable.
You can configure Privacy masking by performing the following steps:
Log on to the network camera to open its Live View page.
Click the Configuration menu.
In the left pane, click on the Privacy Masking.
User can mask the video by clicking any of the (PW 1 -4) button windows shown on
the snapshot frame window where the user can resize , drag , overlap the privacy
masking windows After pressing apply button the privacy mask windows are set on
the encoder and all the streams from the camera start showing the privacy masking
windows.
The privacy masking zones in the windows can support up to 4 zones only, that can
be resized/overlap to a particular dimension.
Remove: To remove the particular privacy mask zone by selecting it from the button
panel and click on remove button and to remove all the privacy masked zones click
on remove all.
Provide the desired values.
Click APPLY to save all changes.
© 2013 RadiumBoards
All Rights Reserved
DVE-DM365
Digital Video Encoder
Configuration and User Guide
V1.2
Page 50 of 62
Advertisement
